Glass cutting, edging, drilling and toughening in Ahmedabad.

Every order is processed in our own factory at GIDC Naroda: cutting, edge finishing, holes and cut-outs and toughening. All cutting, edge work and drilling is finished before the glass is toughened, because toughened glass cannot be cut or drilled afterwards. We toughen glass 4 mm to 12 mm thick, from 102 × 102 mm up to 1092 × 2438 mm.

Why all processing happens before toughening

Toughening locks the surface of the glass in compression. Cutting or drilling it afterwards releases that stress and the glass shatters. So every size, edge and hole has to be right before the glass enters the furnace. The order of work is:

  1. Cut. Sheets are cut to the finished sizes on the drawing.
  2. Edge. Edges are ground or polished to the finish you specify.
  3. Drill and cut out. Holes, notches and cut-outs are made for the fittings.
  4. Wash. Glass is cleaned so nothing marks the surface in the furnace.
  5. Toughen. Glass is heated and rapidly cooled in the toughening furnace.
  6. Inspect and dispatch. Pieces are checked against the order and packed for delivery.

What to put on your drawing

A complete drawing gets an accurate quote first time.

  • Finished length and width of every piece, with quantity
  • Glass thickness
  • Edge finish, and which edges are visible
  • Hole and cut-out sizes, measured from a fixed edge
  • Corner shape (square or radius)
  • End-use, so we can confirm the right glass
Send your drawing See the products we make
WhatsApp us